Tactical military active horizontal headphones 3M MT20H682BB-38 ComTac XPI PELTOR<\/p>\n
replaced the old 3M Peltor ComTac XP model.<\/p>\n
The 3M Peltor ComTac XPI NATO is designed for use in extreme situations and conditions where rugged and reliable equipment is required. The headphones meet the most stringent military requirements for reliability and functionality. The headphones are also equipped with state-of-the-art tactical features, such as an equalizer, which allows the user to concentrate on the task at hand. 3M Peltor MT73 is an improved microphone. From a purely visual point of view, the MT73 microphone is virtually indistinguishable from its predecessor, but there are significant improvements technically: improved noise reduction, water resistance (up to 3 m for 30 minutes) and dust protection (IP68), and improved communication in windy conditions.<\/p>\n
Features<\/strong>:<\/p>\n – Thin cups with a high degree of noise reduction (sig\/noise 28). – Four customization levels and sleep mode. – Low-profile ear cups are designed to be worn under most helmet models; Noise reduction performance: – Improved sealing of the battery compartment against moisture Features<\/strong>:<\/p>\n – It differs from the flagship ComTac\u2122 VI in only 1 technology (communication between headsets without a radio) Characteristics:<\/strong><\/p>\n – Low-profile ear cups are designed to be worn under most helmet models; Noise reduction performance: <\/p>\n","protected":false},"featured_media":15029,"comment_status":"open","ping_status":"closed","template":"","meta":{"inline_featured_image":false},"product_cat":[730],"product_tag":[],"acf":[],"yoast_head":"\n
\n– They have been tested for compliance with the IP68 standard and military technical requirements.
\n– Improved 3M Peltor MT73 microphone.
\n
\nActive protection function with new parameters:<\/strong><\/p>\n
\n– The standby mode is confirmed by a voice message.
\n– Balance mode – adjusts the balance between the left and right earbuds
\n– Equalizer mode – adjust and remove high or low frequencies
\n– Off Time Mode – specifies the time after which the tactical function is reactivated.
\n– Horizontal headband, it is convenient to wear headphones under a helmet.
\n– Kevlar sheathed cable.
\n– The battery life is approximately 500 hours.
\nCharacteristics:<\/strong><\/p>\n
\n– Active protection function in stereo mode;
\n– Configuration menu with voice prompts;
\n– Removable microphone;
\n– Double duplication of all electronic circuit functions;
\n– Waterproof body and microphone;
\n– The external radio communication and active protection functions are independent of each other, which ensures maximum reliability and flexibility in operation;
\n– The external radio channel takes precedence and will be transmitted even if the headphones are turned off or the power is turned off;
\n– Automatically turn off the headphones when there is no activity;
\n– Low battery level alarm. A beep sounds 5 minutes before the batteries are completely depleted;
\n– The battery pack lasts up to 500 hours, depending on the outside temperature;
\n– Balance mode – adjusts the balance between the left and right earbuds
\n– Equalizer mode – adjust and remove high or low frequencies
\n– Off time mode – specifies the time after which the tactical function is re-activated
\n– Headband made of stainless steel in a horizontal design;
\n– Connection to the tangent via the Nexus TP-120 NATO standard jack;
\n– Power supply: two AAA batteries;
\n– Anti-noise performance indicators:
\nH (high) 31 dB,
\nM (medium) 25 dB,
\nL (low) 18 dB, SNR 28 dB.
\nTechnical specifications:
\n<\/strong>– Balance mode
\n– Equalizer mode
\n– Availability of active noise reduction<\/p>\n
\n<\/strong>– High (H) 31 dB (without noise reduction inserts)
\n– Medium (M) 25 dB
\n– Low (L) 18 dB
\n– Signal-to-noise ratio (SNR) 28 dB
\nAdditionally<\/strong>:
\n– Automatic shutdown function
\n– Reinforced cable
\n– Volume control
\n– IP68 waterproof housing
\nNutrition<\/strong>:
\n– Operating time 500 hours
\n– Battery type AAA x2
\nImprovements and differences between 3M Peltor Comtac XPI and its predecessor Comtac XP:<\/strong>:<\/p>\n
\n– Extensive voice menu
\n– You can now change the volume of connected radios
\n– In Ear-Plug mode, the volume of the connected radio is now also increased
\n– Adjustable microphone gain
\n– Added mute mode – quick mute of external microphones.<\/p>\n","protected":false},"excerpt":{"rendered":"
\n– Thin cups with a high degree of noise reduction (sig\/noise 28).
\n– They have been tested for compliance with the IP68 standard and military technical requirements.
\n– Improved 3M Peltor MT73 microphone.<\/p>\n
\n– Active protection function in stereo mode;
\n– Configuration menu with voice prompts;
\n– Removable microphone;
\n– Double duplication of all electronic circuit functions;
\n– Waterproof body and microphone;
\n– The external radio communication and active protection functions are independent of each other, which ensures maximum reliability and flexibility in operation;
\n– The external radio channel takes precedence and will be transmitted even if the headphones are turned off or the power is turned off;
\n– Automatically turn off the headphones when there is no activity;
\n– Low battery level alarm. A beep sounds 5 minutes before the batteries are completely depleted;
\n– The battery pack lasts up to 500 hours, depending on the outside temperature;
\n– Balance mode – adjusts the balance between the left and right earbuds
\n– Equalizer mode – adjust and remove high or low frequencies
\n– Off time mode – specifies the time after which the tactical function is re-activated
\n– Headband made of stainless steel in a horizontal design;
\n– Connection to the tangent via the Nexus TP-120 NATO standard jack;
\n– Power supply: two AAA batteries;
\n– Anti-noise performance indicators:
\nH (high) 31 dB,
\nM (medium) 25 dB,
\nL (low) 18 dB, SNR 28 dB.<\/p>\n
\n<\/strong>– High (H) 31 dB (without noise reduction inserts)
\n– Medium (M) 25 dB
\n– Low (L) 18 dB
\n– Signal-to-noise ratio (SNR) 28 dB<\/p>\n